arsovhome
Редовен Потребител
Тъчскриин Апаратура Graupner MZ-18 9-Channel HoTT System w/Case
Touch screen control!
The mz-18 9-Channel 2.4GHz HoTT transmitter and two receivers are designed with Graupner's unique telemetry technology that supports bi-directional data transmission. This system gives the user real-time information on a variety of functions from a large 3.5" TFT touch-screen monitor or from the included smart voice announcement system. With the optional modules and sensors you can check real-time data for GPS, RPM, temperature and other telemetry functions. 75 frequency hopping channels ensure clear communication between the transmitter and receiver. The programmable transmitter includes preset mixing functions for airplanes, helicopters and gliders.
Front, back, top, side and included case views.
3.5" full-color TFT touch-screen LCD screen
Includes a GR-24L 12-Channel receiver and a GR-12L 6-Channel receiver
Notes from our tech department:
This is the Graupner 2.4GHz mz-18 9-Channel HoTT Transmitter
with GR-12L and GR-24L Receivers.
FEATURES
Skims 75 channels using the HoTT (Hopping Telemetry Transmission)
system to ensure the safest link between transmitter and receiver
Integrated telemetry display with 128x64 LCD
Smart voice announcement system (earphone and buzzer)
Real-time telemetry analysis for Optional Brushless Control telemetry
ESC such as RPM, voltage, consumption current, temperature, warning
Graupner Firmware update through GR STUDIO PC Software
SUMD, SUMO Functions ensures the convenient use of peripherals by
gyro and control board
Selectable 10ms, 20ms signal repetition time for use of analog and
digital servos
Helicopter Functions;
6 Q.link functions
6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo
140, 3 Servo (Elevator), 4 Servo 90)
Pitch curves (7-point)
Throttle curves (7-point)
6 Pitch, Throttle and Trim functions
Heli mix function (Pitch-thro, Pitch-rudd, Elev-thro, Gyro,
Swash limit,
Swash mix function
8 program mixes
Throttle mixing function(AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
Airplane Functions;
6 Q link functions
8 wing types (including delta)
3 tail types
Wing MIX function (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
Throttle curve function
8 program mixes
Snap roll function
Aileron diff function
Flap set function
Airbrake function
Idle Low Function
Glider Functions;
6 Q link functions
8 wing types (including delta)
3 tail types
Wing mixing(RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
8 program mixes
Aileron diff function
Flap MIX function(FLAP, AILE>>FLAP,ELEV>>FLAP, FLAP>>ELEV)
Flap set function
Butterfly function
Programming options include;
30 Model Memory-expandable
6 Q-Link Functions
3 Model Types (Helicopter, Airplane, Glider)
Selectable signal repetition time
Wired and wireless trainer system
3.6V to 8.4V operating voltage
Two year limited warranty beginning at date of purchase
INCLUDES
Graupner 2.4GHz mz-18 9-Channel HoTT Transmitter
GR-12L Receiver
GR-24L Receiver
USB PC interface set
USB interface adaptor wire
2000mAh battery with charger
Hard Case
Neckstrap and Manual
REQUIREMENTS
Servos of modeler's choice
SPECIFICATIONS
Channels: 9
Frequencies: 2.4-2.48GHz
Modulation: FHSS
Display: LED trainer system
Current Consumption: 250.0mA approximate
Controller: 32bit micro controller
Radio Frequency Band: 2.4000-2.4835 GHz
Radio Modulation: FHSS
Temperature Range: 14 - 131°F (-10 - +55°C)
Antenna: Dipole
Display: 128x64 mono LCD
Telemetry Function: Internal LCD, external smart box
Telemetry Announce: Earphone output
Toggle Switch: 5
Volume Knob: 1
UI Interface: Tact s/w
Quick Link: 2
Model Memory: 20
Firmware Upgrade: External USB device
Trainer Function: Wired/Wireless
Dimensions: 7.22 x 10.18 x 3.76" (183.6 x 258.7x 95.9mm)
Weight: 20.12oz (570.4g)
Touch screen control!
The mz-18 9-Channel 2.4GHz HoTT transmitter and two receivers are designed with Graupner's unique telemetry technology that supports bi-directional data transmission. This system gives the user real-time information on a variety of functions from a large 3.5" TFT touch-screen monitor or from the included smart voice announcement system. With the optional modules and sensors you can check real-time data for GPS, RPM, temperature and other telemetry functions. 75 frequency hopping channels ensure clear communication between the transmitter and receiver. The programmable transmitter includes preset mixing functions for airplanes, helicopters and gliders.
- 9-channel transmitter
- Includes 2 receivers: 6-channel & 12-channel
- Multi binding receiver system, allows 2 receivers to be connected in parallel for additional servo use (32 channels max).
- 3.5" large TFT LCD screen with specialized touch panel.
- HoTT (Hopping Telemetry Transmission) bi-directional 2.4GHz technology
- Real-time telemetry analysis for Optional Brushless Control telemetry ESC such as RPM, voltage, consumption current, temperature and warning.
- Real-time data analysis with optional sensor (GPS, fuel status, temperature, voltage, current) and sensor board (general air module, general engine module)
- Smart voice announcement system (earphone and buzzer)
- 30 model memory (capable of expanding model memory, using SD card)
- Airplane, Glider and Helicopter functions
- 6 Q. link functions
- Wired and wireless trainer system
- Two year limited warranty
Front, back, top, side and included case views.
3.5" full-color TFT touch-screen LCD screen
Includes a GR-24L 12-Channel receiver and a GR-12L 6-Channel receiver
Notes from our tech department:
This is the Graupner 2.4GHz mz-18 9-Channel HoTT Transmitter
with GR-12L and GR-24L Receivers.
FEATURES
Skims 75 channels using the HoTT (Hopping Telemetry Transmission)
system to ensure the safest link between transmitter and receiver
Integrated telemetry display with 128x64 LCD
Smart voice announcement system (earphone and buzzer)
Real-time telemetry analysis for Optional Brushless Control telemetry
ESC such as RPM, voltage, consumption current, temperature, warning
Graupner Firmware update through GR STUDIO PC Software
SUMD, SUMO Functions ensures the convenient use of peripherals by
gyro and control board
Selectable 10ms, 20ms signal repetition time for use of analog and
digital servos
Helicopter Functions;
6 Q.link functions
6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo
140, 3 Servo (Elevator), 4 Servo 90)
Pitch curves (7-point)
Throttle curves (7-point)
6 Pitch, Throttle and Trim functions
Heli mix function (Pitch-thro, Pitch-rudd, Elev-thro, Gyro,
Swash limit,
Swash mix function
8 program mixes
Throttle mixing function(AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
Airplane Functions;
6 Q link functions
8 wing types (including delta)
3 tail types
Wing MIX function (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
Throttle curve function
8 program mixes
Snap roll function
Aileron diff function
Flap set function
Airbrake function
Idle Low Function
Glider Functions;
6 Q link functions
8 wing types (including delta)
3 tail types
Wing mixing(RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
8 program mixes
Aileron diff function
Flap MIX function(FLAP, AILE>>FLAP,ELEV>>FLAP, FLAP>>ELEV)
Flap set function
Butterfly function
Programming options include;
30 Model Memory-expandable
6 Q-Link Functions
3 Model Types (Helicopter, Airplane, Glider)
Selectable signal repetition time
Wired and wireless trainer system
3.6V to 8.4V operating voltage
Two year limited warranty beginning at date of purchase
INCLUDES
Graupner 2.4GHz mz-18 9-Channel HoTT Transmitter
GR-12L Receiver
GR-24L Receiver
USB PC interface set
USB interface adaptor wire
2000mAh battery with charger
Hard Case
Neckstrap and Manual
REQUIREMENTS
Servos of modeler's choice
SPECIFICATIONS
Channels: 9
Frequencies: 2.4-2.48GHz
Modulation: FHSS
Display: LED trainer system
Current Consumption: 250.0mA approximate
Controller: 32bit micro controller
Radio Frequency Band: 2.4000-2.4835 GHz
Radio Modulation: FHSS
Temperature Range: 14 - 131°F (-10 - +55°C)
Antenna: Dipole
Display: 128x64 mono LCD
Telemetry Function: Internal LCD, external smart box
Telemetry Announce: Earphone output
Toggle Switch: 5
Volume Knob: 1
UI Interface: Tact s/w
Quick Link: 2
Model Memory: 20
Firmware Upgrade: External USB device
Trainer Function: Wired/Wireless
Dimensions: 7.22 x 10.18 x 3.76" (183.6 x 258.7x 95.9mm)
Weight: 20.12oz (570.4g)
Последна промяна: